| Quantity: | |
|---|---|
Specification
PE100 HDPE Electrofusion Reducer for Gas Water Oil and Sewage Treatment
| Fittings Type | Specification | Diameter(mm) | Pressure |
| HDPE Electrofusion Fittings | EF Coupler | DN20-1400mm | SDR17, SDR11 SDR9(50-400MM) |
| EF Reducer | DN20-1200mm | SDR17, SDR11 SDR9(50-400MM) | |
| EF 45 Deg Elbow | DN50-1000mm | SDR17, SDR11 SDR9(50-400MM) | |
| EF 90 Deg Elbow | DN25-1000mm | SDR17, SDR11 SDR9(50-400MM) | |
| EF Tee | DN20-800mm | SDR17, SDR11 SDR9(50-400MM) | |
| EF Reducing Tee | DN20-800mm | SDR17, SDR11 SDR9(50-400MM) | |
| EF End Cap | DN50-400mm | SDR17, SDR11 SDR9(50-400MM) | |
| EF Tapping Saddle | DN63-400mm | SDR17, SDR11 |
| Specifications | L | A | B | φd |
| φD×φD1 | mm | mm | mm | mm |
| 25×20 | 95 | 45 | 35 | 4.7 |
| 32×20 | 95 | 45 | 45 | 4.7 |
| 32×25 | 95 | 40 | 45 | 4.7 |
| 40×25 | 100 | 50 | 40 | 4.7 |
| 40×32 | 100 | 50 | 40 | 4.7 |
| 50×25 | 110 | 55 | 40 | 4.7 |
| 50×32 | 110 | 55 | 40 | 4.7 |
| 50×40 | 110 | 50 | 50 | 4.7 |
| 63×25 | 115 | 60 | 40 | 4.7 |
| 63×32 | 120 | 60 | 40 | 4.7 |
| 63×40 | 120 | 55 | 40 | 4.7 |
| 63×50 | 120 | 55 | 50 | 4.7 |
| 75×50 | 120 | 65 | 50 | 4.7 |
| 75×63 | 130 | 65 | 50 | 4.7 |
| 90×50 | 140 | 65 | 55 | 4.7 |
| 90×63 | 140 | 65 | 55 | 4.7 |
| 90×75 | 145 | 65 | 60 | 4.7 |
| 110×63 | 160 | 75 | 55 | 4.7 |
| 110×75 | 155 | 75 | 60 | 4.7 |
| 110×90 | 155 | 75 | 65 | 4.7 |
| 125×63 | 160 | 80 | 60 | 4.7 |
| 125×90 | 160 | 80 | 70 | 4.7 |
| 125×110 | 165 | 85 | 69 | 4.7 |
| 160×90 | 195 | 94 | 74 | 4.7 |
| 160×110 | 195 | 95 | 75 | 4.7 |
| 160×125 | 195 | 95 | 75 | 4.7 |
| 200×110 | 210 | 95 | 80 | 4.7 |
| 200×160 | 210 | 95 | 85 | 4.7 |
| 250×110 | 230 | 100 | 80 | 4.7 |
| 250×160 | 230 | 110 | 90 | 4.7 |
| 250×200 | 230 | 110 | 100 | 4.7 |
| 315×200 | 240 | 100 | 100 | 4.7 |
| 315×250 | 240 | 100 | 100 | 4.7 |
| 400×250 | 260 | 110 | 105 | 4.7 |
| 400×315 | 260 | 110 | 105 | 4.7 |
| 400×355 | 311 | 150 | 140 | 4.7 |
| 450×400 | 315 | 155 | 143 | 4.7 |
| 500×315 | 320 | 140 | 133 | 4.7 |
| 500×400 | 330 | 150 | 145 | 4.7 |
| 630×400 | 390 | 193 | 160 | 4.7 |
| 630×500 | 391 | 193 | 165 | 4.7 |
Product Description:
The HDPE Electrofusion Reducer is a specialized pipe fitting designed for joining high-density polyethylene (HDPE) pipes of different diameters seamlessly and reliably.
1. Material and Construction:
The electrofusion reducer is typically manufactured from high-quality HDPE material, known for its exceptional strength, durability, and chemical resistance.
It consists of two concentric sections with different diameters, allowing for the transition between larger and smaller pipes.
The inner and outer surfaces are precisely machined to ensure a snug fit and proper alignment during installation.
2. Electrofusion Fusion Process:
The HDPE electrofusion reducer utilizes an electrofusion fusion process for joining pipes. This involves heating the fitting and the pipe ends simultaneously using an electrofusion welding machine.
Once heated, the molten material from the fitting and the pipe ends fuse together under pressure, creating a strong and leak-proof joint.
Electrofusion welding ensures uniform fusion and joint integrity, providing a long-lasting and reliable connection.
3. Design Features:
The reducer is designed with smooth inner surfaces to minimize flow resistance and pressure drop within the pipeline.
It may feature barcodes or traceability markings for quality control and tracking purposes.
The design allows for easy installation and ensures compatibility with various pipe sizes and applications.
4. Applications:
HDPE electrofusion reducers are widely used in water supply, wastewater treatment, gas distribution, industrial processing, mining, and other applications.
They are suitable for transitioning between pipes of different diameters, accommodating changes in pipeline layout and configuration.
5. Installation and Maintenance:
Installation of HDPE electrofusion reducers requires trained personnel and specialized equipment, including an electrofusion welding machine.
Proper installation techniques must be followed to ensure the integrity and performance of the joint.
Once installed, HDPE electrofusion reducers require minimal maintenance and provide long-term reliability in various operating conditions.
6. Compliance and Standards:
HDPE electrofusion reducers are manufactured in compliance with industry standards and specifications, ensuring quality and performance.
They may adhere to international standards such as ISO 4427, EN 12201, and ASTM D2513, among others.
Specification
PE100 HDPE Electrofusion Reducer for Gas Water Oil and Sewage Treatment
| Fittings Type | Specification | Diameter(mm) | Pressure |
| HDPE Electrofusion Fittings | EF Coupler | DN20-1400mm | SDR17, SDR11 SDR9(50-400MM) |
| EF Reducer | DN20-1200mm | SDR17, SDR11 SDR9(50-400MM) | |
| EF 45 Deg Elbow | DN50-1000mm | SDR17, SDR11 SDR9(50-400MM) | |
| EF 90 Deg Elbow | DN25-1000mm | SDR17, SDR11 SDR9(50-400MM) | |
| EF Tee | DN20-800mm | SDR17, SDR11 SDR9(50-400MM) | |
| EF Reducing Tee | DN20-800mm | SDR17, SDR11 SDR9(50-400MM) | |
| EF End Cap | DN50-400mm | SDR17, SDR11 SDR9(50-400MM) | |
| EF Tapping Saddle | DN63-400mm | SDR17, SDR11 |
| Specifications | L | A | B | φd |
| φD×φD1 | mm | mm | mm | mm |
| 25×20 | 95 | 45 | 35 | 4.7 |
| 32×20 | 95 | 45 | 45 | 4.7 |
| 32×25 | 95 | 40 | 45 | 4.7 |
| 40×25 | 100 | 50 | 40 | 4.7 |
| 40×32 | 100 | 50 | 40 | 4.7 |
| 50×25 | 110 | 55 | 40 | 4.7 |
| 50×32 | 110 | 55 | 40 | 4.7 |
| 50×40 | 110 | 50 | 50 | 4.7 |
| 63×25 | 115 | 60 | 40 | 4.7 |
| 63×32 | 120 | 60 | 40 | 4.7 |
| 63×40 | 120 | 55 | 40 | 4.7 |
| 63×50 | 120 | 55 | 50 | 4.7 |
| 75×50 | 120 | 65 | 50 | 4.7 |
| 75×63 | 130 | 65 | 50 | 4.7 |
| 90×50 | 140 | 65 | 55 | 4.7 |
| 90×63 | 140 | 65 | 55 | 4.7 |
| 90×75 | 145 | 65 | 60 | 4.7 |
| 110×63 | 160 | 75 | 55 | 4.7 |
| 110×75 | 155 | 75 | 60 | 4.7 |
| 110×90 | 155 | 75 | 65 | 4.7 |
| 125×63 | 160 | 80 | 60 | 4.7 |
| 125×90 | 160 | 80 | 70 | 4.7 |
| 125×110 | 165 | 85 | 69 | 4.7 |
| 160×90 | 195 | 94 | 74 | 4.7 |
| 160×110 | 195 | 95 | 75 | 4.7 |
| 160×125 | 195 | 95 | 75 | 4.7 |
| 200×110 | 210 | 95 | 80 | 4.7 |
| 200×160 | 210 | 95 | 85 | 4.7 |
| 250×110 | 230 | 100 | 80 | 4.7 |
| 250×160 | 230 | 110 | 90 | 4.7 |
| 250×200 | 230 | 110 | 100 | 4.7 |
| 315×200 | 240 | 100 | 100 | 4.7 |
| 315×250 | 240 | 100 | 100 | 4.7 |
| 400×250 | 260 | 110 | 105 | 4.7 |
| 400×315 | 260 | 110 | 105 | 4.7 |
| 400×355 | 311 | 150 | 140 | 4.7 |
| 450×400 | 315 | 155 | 143 | 4.7 |
| 500×315 | 320 | 140 | 133 | 4.7 |
| 500×400 | 330 | 150 | 145 | 4.7 |
| 630×400 | 390 | 193 | 160 | 4.7 |
| 630×500 | 391 | 193 | 165 | 4.7 |
Product Description:
The HDPE Electrofusion Reducer is a specialized pipe fitting designed for joining high-density polyethylene (HDPE) pipes of different diameters seamlessly and reliably.
1. Material and Construction:
The electrofusion reducer is typically manufactured from high-quality HDPE material, known for its exceptional strength, durability, and chemical resistance.
It consists of two concentric sections with different diameters, allowing for the transition between larger and smaller pipes.
The inner and outer surfaces are precisely machined to ensure a snug fit and proper alignment during installation.
2. Electrofusion Fusion Process:
The HDPE electrofusion reducer utilizes an electrofusion fusion process for joining pipes. This involves heating the fitting and the pipe ends simultaneously using an electrofusion welding machine.
Once heated, the molten material from the fitting and the pipe ends fuse together under pressure, creating a strong and leak-proof joint.
Electrofusion welding ensures uniform fusion and joint integrity, providing a long-lasting and reliable connection.
3. Design Features:
The reducer is designed with smooth inner surfaces to minimize flow resistance and pressure drop within the pipeline.
It may feature barcodes or traceability markings for quality control and tracking purposes.
The design allows for easy installation and ensures compatibility with various pipe sizes and applications.
4. Applications:
HDPE electrofusion reducers are widely used in water supply, wastewater treatment, gas distribution, industrial processing, mining, and other applications.
They are suitable for transitioning between pipes of different diameters, accommodating changes in pipeline layout and configuration.
5. Installation and Maintenance:
Installation of HDPE electrofusion reducers requires trained personnel and specialized equipment, including an electrofusion welding machine.
Proper installation techniques must be followed to ensure the integrity and performance of the joint.
Once installed, HDPE electrofusion reducers require minimal maintenance and provide long-term reliability in various operating conditions.
6. Compliance and Standards:
HDPE electrofusion reducers are manufactured in compliance with industry standards and specifications, ensuring quality and performance.
They may adhere to international standards such as ISO 4427, EN 12201, and ASTM D2513, among others.
